Port Trigger - D-Link DSL-2750 User Manual

Section 3 - Configuration
Port triggering allows ports to be opened for remote access if
triggered by activity by a local computer on specified ports.
Click Add, Edit, or Delete to reveal the Port Trigger setup options.
Enable Port Check this to enable the port trigger feature.
Trigger:
Service
Enter a name for the server or service.
Name:
Rule Status: Select whether to Enable or Disable this rule.
Trigger Port Enter the starting and ending port to monitor to trigger this
Start/End:
rule.
Trigger
Select the protocol to monitor for to trigger this rule.
Protocol:
Open Port Enter the starting and ending port to open when the rule is
Start/End:
triggered.
Open
Enter the protocol to allow through the opened ports.
Protocol:
D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

Port Trigger

37