Wps Settings - D-Link DSL-2750 User Manual

Section 3 - Configuration
This section allows you to configure how the DSL-2750B uses Wi-Fi
Protected Setup (WPS) to create a secure wireless connection.
Select the SSID of the virtual network you wish to configure.
Enable WPS: Check the box to enable devices to connect to the router using
WPS.
Device PIN: Displays the current PIN (Personal Identification Number) for
the router's WPS connection. Wireless clients connecting to the
router using the PIN method should enter this PIN in order to
connect. Click New PIN to generate a new PIN.
Generate PIN Click PIN to enter a PIN for the new device that you wish to
Status:
connect.
Click PBC to activate the WPS-PBC (push-button) method. You
Push Button:
will then have 120 seconds to press the WPS button on the new
device that you wish to connect.
Input Station Enter the PIN for the station that you wish to connect to. Click
PIN:
PIN to connect to the device.
WPS Session Displays the current status of WPS.
Status:
D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

WPS Settings

33