Igmp/Mld - D-Link DIR-822 User Manual

DIR-822 AC1200 Wave 2 MU-MIMO Wi-Fi EasyMesh
Router
User Manual

IGMP/MLD

On the Functions/ Advanced / IGMP/MLD page, you can allow the router to use IGMP and
MLD and specify needed settings.
IGMP and MLD are used for managing multicast traffic (transferring data to a group of
destinations) in IPv4 and IPv6 networks correspondingly. These protocols allow using network
resources for some applications, e.g., for streaming video, more efficiently.
The following elements are available on the page:
Parameter
Enable
IGMP version
Interface
Enable
MLD version
Interface
After specifying the needed parameters, click the APPLY button.
Figure 136. The Functions / Advanced / IGMP/MLD page.
Move the switch to the right to enable IGMP.
Select a version of IGMP from the drop-down list.
From the drop-down list, select a connection of the Dynamic IPv4 or
Static IPv4 type for which you need to allow multicast traffic (e.g.
streaming video).
Move the switch to the right to enable MLD.
Select a version of MLD from the drop-down list.
From the drop-down list, select a connection of the Dynamic IPv6 or
Static IPv6 type for which you need to allow multicast traffic (e.g.
streaming video).
Page 175 of 213
Description
IGMP
MLD
Configuring via Web-based Interface