Igmp Proxy - D-Link DSL-2750 User Manual

Section 3 - Configuration
Creating an IGMP proxy enables the system to issue IGMP host
messages on behalf of hosts that the system has discovered through
standard IGMP interfaces. This allows the system to act as a proxy for
its hosts after being enabled.
WAN Interface: Select the WAN interface you wish to configure.
IGMP Version:
Select either IGMP V1, IGMP V2, or IGMP V3 from the list.
Enable IGMP
Check this box to enable IGMP proxy.
Proxy:
LAN Select the LAN connection to use.
Connection:
Enable
Check this box to enable FastLeaving.
FastLeaving:
General Query/ Enter the query interval and query response interval in box.
Response
Interval:
Group Query/
Enter the group query interval and the group query response
Response
interval in the box.
Interval:
Group Query
Enter the group query count in the box.
Count:
Last Member Enter the last member query interval in the box.
Query Interval:
Last Member
Enter the last member query count in the box.
Query Count:
D-Link DSL-2750B Wireless N300 ADSL2+ Modem Router User Manual

IGMP Proxy

58