Table of Contents
Advertisement
3. Display Description and Operation Procedure
3.4 MODE
Mode Description
[SINGLE MODE]
Perform a measurement once within the pre-set time frame.
Example: If the setting is as follows in "CONFIG" menu (Refer to 3.6.1 SINGLE):
INTERVAL
SAMPLE T.
CYCLES
A 15 second sample is performed.
Measurement Flow
Start
Measurement
* Delay Time: For time set in START DELAY window referring to 3.9.2 OPTION.
www.actoolsupply.com
: N/A
: 00:00:15
: N/A
Sampling Time
Wait Time
(15sec)
www.actoolsupply.com
Tap [MODE] to display the mode selection
window.
Choose a mode from the below selection and tap it:
SINGLE, SEQUENCE, INTERVAL, REPEAT,
STAT or STANDARD.
Note that the instrument is capable of 180 hours of
continuous operation in every measurement mode.
Finish
Measurement
8
10 sec
Delay Time
Advertisement
Table of Contents
