Testing System; Single Measurement Mode; Average Measurement Mode - Kanomax TABmaster 6720 Instruction Manual

1.Measure/Test System--According to tools, the corresponding test values.
2.Setting/Instrument Settings—Date &Time, Bluetooth Switch, printer connecting, etc.
3.Data/Data Handling--Display storage data. The functions of print and delete are available.
4.Export/Data Output--Export stored data via PC.
5.1. Measuring System
1
2
3
4
5
1. Temperature, Humidity（Capture Hood）2.Test Data Display
3.Atmospheric Pressure
5.Data storage icon
7.Test mode —display the current testing mode
9.Test tool
11.Bluetooth Status

5.1.1Single Measurement Mode

Note：
1） START: Left-button for the micromanometer or instrument base.
2） After testing start for about 8s with stably measuring, output displaying the test data and testing wind
direction.
3） Testing stop when finish outputting.
4） After the measurement stops, press "SAVE" to record the testing value, if you do the "Cycle" No.
will increase by 1.
5） Same testing method with the capture hood when using the Velocity Grid、Pitot、Micromanometer.

5.1.2 Average Measurement Mode

4. ON /OFF icon
6. Test ID and total quantity of storage data
8.Wind direction icon
10.Power supply mode —display the current power supply
12. Connecting the Bluetooth printer
START
14
12
11
10
9
8
7
6