Table of Contents
Advertisement
3. Display Description and Operation Procedure
- When using MAP (Refer to 3.6 CONFIG for using a MAP.)
www.actoolsupply.com
Tap [START] to display MAP.
Select a measurement point and tap [START].
Tap [STOP] to stop a measurement.
Tap [MAGNIFY] to enlarge a MAP.
(This button will become [MINIFY] button. Press
[MINIFY] to display an entire MAP when a map is
magnified.)
([OK] and [CANCEL] buttons are inactive.)
[UP], [DOWN], [LEFT] and [RIGHT] buttons will
be activated, which enables you to move MAP.
www.actoolsupply.com
19
Advertisement
Table of Contents
