Repeat - Kanomax 3900 Operation Manual

3. Display Description and Operation Procedure

3.6.4 REPEAT

www.actoolsupply.com
You can set SAMPLE T., CYCLES and MANUAL
STOP.
Tap the entry field of SAMPLE T. to display a
numeric keypad. Enter "hour", "minute" and
"second" and tap [OK].
Tap the entry field of "CYCLES" to display a
numeric keypad. Enter a value and tap [Enter].
Check "MANUAL STOP" to continue measuring
until you stop the measurement, regardless of the
CYCLES setting.
Check "AUTO SAVE" to store data automatically.
Check "AUTO PRINT" to print data automatically.
Check "START DELAY" to use delay time prior to a
measurement.
Tap [OK] to save and activate the settings.
Tap [PRESET] to display a window asking you to
input "PRESET NAME".
Tap the entry field to display the keyboard. Enter the
file name and tap [Enter].
Tap [OK] to save the current settings (including
AUTO SAVE, AUTO PRINT and START DELAY)
on the CF card.
* You can automatically configure measurement
www.actoolsupply.com
settings by loading a saved PRESET. Refer to 3.8
PRESET.
26