Table of Contents
Advertisement
Important Safety Information
¤ Unplug the power cord when the instrument is not in use.
...... Failure to observe the above may result in electric shock, fire or damage to internal circuitry.
¤ When using the AC adapter, ensure there is no dust on the adapter. The AC outlet used must
be within the specified power requirement of 100 ~ 240V.
...... Failure to observe the above may result in fire.
¤ When using an AC adapter, only use the adapter specified for this instrument.
...... Other commercially available adapters may have different voltage specifications, which
¤ Remove battery when the instrument is not to be used for an extended period of time. Also do
not leave discharged battery inside the instrument.
...... Failure to observe the above may result in battery leakage and damage to the instrument.
Handle Properly
¤ Do not perform measurements in environments exceeding the specified temperature and RH
levels of the instrument.
The instrument should not be exposed to direct sunlight for prolonged period.
...... The instrument may not function properly outside the specified environment.
Prohibition
¤ Do not wipe the instrument with volatile solvents.
...... The body may be deformed or deteriorated. Use soft dry cloth to remove stains. If
Prohibition
¤ Do not subject the instrument to strong shock. Do not place heavy objects on the instrument or
sensor.
...... Failure to observe the above may cause damage to the instrument.
Prohibition
¤ Do not touch the instrument when it is electrically charged.
...... Failure to observe above may affect measurement value and cause damage to the instrument
www.actoolsupply.com
WARNING
could result in short circuit, fire or damage to the instrument.
(10~40°C, 20~85%RH, non condensing)
stains persist, soak the cloth in a neutral detergent or water and wipe the instrument
with the cloth. Never use volatile solvents such as thinner or benzene.
circuitry.
www.actoolsupply.com
CAUTION
ii
Advertisement
Table of Contents
