Water Connection - Miele G 7825 Operating Instructions Manual

 Please refer to the installation diagram supplied with the
machine.
– The water supply must at least meet the standards for drinking
water. A high iron content can leave a rust film on items being
cleaned and the machine itself. When the chloride content in the
water supply is above 100 mg/l, the risk of corrosion damage to
items being cleaned is greatly increased.
– In certain regions (e.g. mountain regions) the water composition
may cause precipitates to form, requiring the use of softened water
for the steam condenser.
– The machine is designed for connection to cold, hot and DI water. If
there is no hot water supply, the intake valve for the warm water
connection should be connected to the cold water supply.
Water intake
In the
parallel to shorten the program duration.
program phase two valves can be controlled in

Water connection

61