Miele G 7825 Operating Instructions Manual page 13


Always exercise caution when handling the process chemicals for
this machine. These products may contain irritant, corrosive or toxic
ingredients.
Always comply with safety requirements and the manufacturer's
safety instructions (see safety data sheets)!
Use protective eyewear and gloves!

The washer-disinfector is designed to operate with water and the
recommended processing chemicals only. The machine must not be
operated with organic solvents or flammable liquids!
This could cause an explosion, property damage due to the
destruction of rubber and plastic components, and the resulting
leakage of liquids.

The water in the cabinet must not be used as drinking water.

Be careful when sorting items with sharp, pointed ends. Position
them in the machine so that you will not hurt yourself or create a
danger for others.

When operating the machine, beware of the high temperatures
involved. If you bypass the electrical lock to open the door, there is a
danger of scalding and heat or chemical burns. If disinfectants have
been used, there is also the danger of inhaling toxic vapour.

If toxic chemical substances can form in the wash water during
processing (e.g. aldehydes in the disinfectant), the door seal and, if
applicable, the function of the steam condenser must be checked
regularly.
In this event, opening the door of the washer-disinfector during a
program interruption is particularly hazardous.

Should personnel accidentally come into contact with toxic
vapours or processing chemicals, consult the manufacturer's safety
data sheets for emergency procedures.

Always allow wash carts, modules, inserts, and loads to cool down
before unloading. Any water remaining in concave items could still be
very hot. Empty them into the wash cabinet before taking them out.

After drying with the drying unit, leave the door open at first to
allow the items, wash carts, modules and inserts to cool down.

If the boiler has been programmed to "BOILER READY", always
beware of hot water and steam when opening the door! Looking from
the unclean side, the inlet pipe is located beneath the left basket
guide rail.

Do not touch the heating elements when you open the door
directly after completion of a program. They remain hot even for some
minutes after the program has ended and can cause burns.

Steam heating is permissible up to a pressure of 1000 kPa (145
psi). This corresponds to a water steam temperature of 179 °C.
Warning and Safety Instructions
13