Transfer Trolley For Loading And Unloading The Machine; Adjusting The Foot Pedal - Miele G 7825 Operating Instructions Manual

Application technology
Adjusting the foot
pedal
30

Transfer trolley for loading and unloading the machine

 Contaminated surfaces of the transfer trolley must be
disinfected after the machines has been loaded.
Only use chemical disinfectants recognized by Health Canada.
The Miele transfer trolley can be used to transport wash carts from
the preparation area to the washer-disinfector and from there to the
checking and wrapping table.
The height of the transfer trolley can be adjusted by Miele.
The height should be set so that the open machine door is held
underneath the side catches on the transfer trolley.
If the machine is not fitted on a base the position of the foot pedal on
the transfer trolley may need to be changed.
Unscrew foot pedal .

Loosen lock nuts  on the set screw .

Screw the set screw  further through the foot pedal so that the

end stop is reached earlier.
Relock the set screw.

Screw on the foot pedal.
