Message "Check Dispensing System [X]; Priming The Dispensing System - Miele G 7825 Operating Instructions Manual

Dispensing liquid detergents and neutralizer
40
Insert the suction lance into the container opening and screw it into

place.
Once the containers have been filled, the message clears from the
display.
Place the container in the washer-disinfector.

Close the service panel.


Message "Check dispensing system [X]"

The current program has been interrupted.
Check the container(s) and dispensing hoses shown in the display.

[x] Instead of an X, the number of the affected dispensing system will
appear.
Refill the container or replace it with a full one.

Use the appropriate service program to prime the affected

dispensing system (clear it of air).
If a container is not being used, the level query for the unused
dispensing system can be turned off to avoid the error message (see
"Machine functions, container query..." in the Programming Manual
supplied with the washer-disinfector).

Priming the dispensing system

Whenever a container has been allowed to completely empty, it must
be primed (cleared of air) after refilling.
Select the corresponding service program, e. g., DOS1-FILL.

Press the  start button.
