User Profiles - Miele G 7825 Operating Instructions Manual

Intended use
Daily-routine
operators
Daily-routine
supervisors
Service tasks and
administration
6
The cleaning result must ensure that the load can be disinfected
correctly, that no residues are left behind, that subsequent
sterilization can be carried out and that the instruments can be used
again safely.
Re-usable medical devices are best reprocessed using the DES-VAR-
TD process, or where applicable, the OXIVARIO process.
The use of a suitable carrier (wash carts, modules, insert, etc.) is
important to ensure the adequate cleaning of the load. Examples are
given in the section "Areas of application".
The washer-disinfector is designed to rinse with tap water or
processed water (e.g., distilled water, pure water, demineralized
water, partially demineralized water) depending on the quality
required for your application(s). The water quality selected is
especially important for laboratory equipment intended for analytical
uses.
This washer-disinfector complies with EN ISO 15883 (CAN/CSA-
Z15883).

User profiles

For daily-routine operation of the washer-disinfector, operators must
be instructed and receive regular training in the basic functions and
loading of the washer-disinfector. They require a basic knowledge of
machine reprocessing of medical devices.
Tasks for daily-routine work are located in operating levels A and C.
Advanced knowledge of the machine-based reprocessing of medical
devices is required for more complex tasks such as program
interruption or program cancellation.
These tasks take place on operating level B.
Additional expertise is required for changing the processes or
adjusting the washer-disinfector, e.g. to suit accessories that are
used or the site conditions.
This requires special expertise in the machine-based reprocessing of
medical devices, in the reprocessing technology and the applicable
standards and legislation.
Service tasks and alterations are carried out on operating level D.