Baby Bottles - Miele G 7825 Operating Instructions Manual

Application technology
Support frame
E 750
24

Baby bottles

Baby bottles in E 135 containers can be processed in the two lower
levels of wash cart E 735/1. In addition, E 364 containers with wide-
necked teats and E 458 containers with screw-cap teats can be
placed in the upper level of the wash cart.
– Only use baby bottles with washer-safe volume markings.
– If there is a delay of 4 hours or more before bottles can be washed,
fill them with water to prevent residues from drying on.
If the process is not to be followed by sterilization, the load should
be dried completely to avoid the development of water-borne
bacteria.
A sufficient drying time is therefore absolutely essential.
The inserts for baby bottles and bottle teats come with their own
operating instructions.
Place the support frame in the middle of the upper level of the E

735/1 wash cart.
Place one E 135 container on each side on the hook of the support

frame.
The angled positioning of the containers ensures that all of the inside
of the bottle is reached by the water jets.