Door Lock Switch Test - Acura 3.5 RL Manual

Door Key Cylinder Switch Test
1. Remove the door panel (see
2. Disconnect the 3P connector from the key cylinder
switch.
Terminal side of
male terminals
3. Check for continuity between the terminals in each
switch position according to the table.
section 20).
3P CONNECTOR

Door Lock Switch Test

1. Remove the door panel (see
2. Remove the two screws, then remove the door lock
switch.
3. Check for continuity between the terminals in each
switch position according to the table.
section 20).
DOOR LOCK SWITCH