Settings - Lightware UMX-OPT-TX150R User Manual

10.3. Factory Default Settings
10.4. Factory EDID List
INFO
Minor changes in the factory EDID list may be applied in further firmware versions.
The Emulated EDIDs on the video inputs can be chosen by rotary switches only:
Page 100 / 103
Parameter
Input port
HDCP
No sync color
No sync color
Output video mode
Output HDCP mode
Video Auto Select
Audio Auto Select
Control protocol
Baud rate
Data bits
Parity
Stop bits
Operation mode
Number on DVI-D
EDID rotary
#0 Copy from SC MM OUT (Dynamic EDID)
#1 Factory EDID Universal HDMI (default)
#2 Factory EDID (DVI) 1024x768@60
#3 Factory EDID (HDMI) 1280x720p@60
#4 Factory EDID (HDMI) 1920x1080p@60
#5 Factory EDID (DVI) 1920x1200@60
#6 User EDID (def.: Univ. HDMI EDID)
#7 User EDID (def.: Univ. HDMI EDID)
#8 User EDID (def.: Univ. HDMI EDID)
#9 User EDID (def.: Univ. HDMI EDID)
Number on DVI-A
EDID rotary
#0 Copy from SC MM OUT (Dynamic EDID)
#1 Factory EDID Universal Analog (default)
#2 Factory EDID (Analog) 1024x768@60
#3 Factory EDID (Analog) 1280x720@60
#4 Factory EDID (Analog) 1920x1080@60
#5 Factory EDID (Analog) 1920x1200@60
#6 User EDID (def.: Univ. Analog EDID)
Setting/Value
Video Port Settings
DVI-D
Enabled
Enabled
7F7F7F (grey)
Auto
Auto
Enabled, NonPriority, First detect
Enabled, First detect: Embedded, S/PDIF, Analog 2
RS-232 Settings
LW2
57600
8
No
1
Pass-through
EDIDs for DVI-D Input
EDIDs for DVI-A Input
EDID reference
in protocol
D01
F01
F02
F03
F04
F05
U01
U02
U03
U04
EDID reference
in protocol
D01
F06
F07
F08
F09
F10
U05
Chapter 10. Appendix