Lightware UMX-OPT-TX150R User Manual page 89

LDU Upgrade
Step 1. Run the application. In the welcome screen click on the
Step 2. Set the desired update settings in the Options section.
▪
▪
▪
Step 3. Press the Update button to download
8.1.1. Establish the Connection between the Computer and the Device
Make sure that the computer and the device are connected via an USB and the connection
is established between them.
8.1.2. Start the LDU and Follow the Instructions
After launching LDU the welcome screen will appear:
Chapter 8. Firmware Upgrade
corner; the About window will appear. Click on the Check now button. The program
checks the available updates on Lightware website and shows its version.
If you do not want to check for the
updates automatically, uncheck the
circle, which contains the green tick.
If you want to postpone the update,
a reminder can be set with different
delays from the drop down list.
If the proxy settings traverse the
update process, set the proper
values then click the OK button.
the new version; the installer will
start.
UMX-OPT-TX150R
User's Manual
?
button in the top right
Page 89 / 103