Wall Mounted Installations - Extreme Networks AP-7562 Installation Manual

4 Position the Access Point so the gore vent is facing down. Attach the extension arm to
the bracket with two 1/2 inch bolts and nuts. Tighten the nuts to 300 inch pounds (lbf-
in).

Wall Mounted Installations

For wall mount installations, use only the Access Point bracket and angle adjust bracket if
required.
CAUTION
Always mount the AP-7562 with the black gore vent facing down.
NOTE
The U-bolt and band clamps are not included in the mounting bracket kit.
AP-7562 Installation Guide
Hardware Mounting and Installation
32