Hardware Mounting And Installation; Mounting Bracket Kit; Extension Arm Kit - Extreme Networks AP-7562 Installation Manual

2
The AP-7562 mounting bracket kit (KT-147407-01) is recommended for most deployments.
When a standoff distance is required for a pole mounted or wall mounted installation, use
the extension arm kit (KT-150173-01). Additionally, the KT-147407-02 stainless steel hardware
mounting bracket kit is available for deployments in corrosive environments.
NOTE
The KT-147407-02 stainless steal bracket is specially rated for deployments that
potentially contain corrosive particles in the air.

Mounting Bracket Kit

The AP-7562 mounting bracket kit (KT-147407-01) includes the Access Point bracket (left),
angle adapter bracket (center), and pole mount bracket (right) sections:
The Access Point bracket and angle adapter bracket can be rotated (plus or minus 15
degrees) and tilted (up to 45 degrees) to orient the unit for optimal positioning.
The following ancillary hardware is included in the kit to assemble the mounting bracket:
Description
M6 serrated hex flanged screws
1/2 inch hex head nut
1/2 inch x 3/4 inch hex head bolt
A torque wrench or ratchet with a 10mm adapter, or an adjustable wrench, can be used to
assemble the mounting brackets.

Extension Arm Kit

AP-7562 Installation Guide
Hardware Mounting and
Installation
Quantity
7
2
2
21