Vmm Power Options - Extreme Networks AP-7562 Installation Manual

VMM Power Options

A mounted AP-7562 operating as a VMM within a vehicle or mobile asset requires a power
source delivered via Power over Ethernet (PoE). A professional certified installation partner
should be consulted in respect to appropriate power sources and installation within a
vehicle or mobile asset. A vehicular power source is not provided. No responsibility is taken
for any power source design operated outside of the allowed specifications for power of an
AP-7562 operating as a VMM.
The following table shows a number of potential power sources and corresponding industry
options to power an AP-7562 VMM:
WARNING
Exceeding these listed power requirements can invalidate the Access Point
warranty.
Potential Vehicular/Mobile
Power Sources
12V battery
24V battery
12V power plug
AC inverter within vehicle
PoE switch in train or vehicle
AP-7562 Installation Guide
Required Source
DC-DC convertor or DC PoE injector
DC-DC convertor or DC PoE injector
DC PoE injector with power plug
adapter
AC PoE injector
Direct connection via CAT5E cable
Introduction
19