Throttle Body Installation - Suzuki GSX-R1000K5 Service Manual

THROTTLE BODY INSTALLATION

Installation is in the reverse order of removal. Pay attention to
the following points:
• Connect the fuel injector couplers to the fuel injectors. Make
sure that each coupler is installed in the correct position. The
color on each lead wire refers to the appropriate fuel injector.
1 Primary injector
#1 Y/R and Gr/W
#2 Y/R and Gr/B
#3 Y/R and Gr/Y
#4 Y/R and Gr/R
• Connect the throttle pulling cable 3 and throttle returning
cable 4 to the throttle cable drum.
• Loosen each throttle cable lock-nut.
• Turn in each throttle cable adjuster fully and locate each outer
cable so that the clearance is 0 mm (0 in).
• Tighten each lock-nut.
• Adjust the throttle cable play.
Refer to page 2-15 for details.
2 Secondary injector
Y/R and Lg
Y/R and Lg/W
Y/R and Lg/G
Y/R and Lg/Bl
FUEL SYSTEM AND THROTTLE BODY 5-21
0 mm (0 in)
0 mm (0 in)