Table of Contents
Advertisement
SECURING THE PREMISES
Arming the System
NOTE: LYNX will provide a short confirmation ding when it has been armed using an RF Key Fob.
Arming in Stay Mode
Use this mode when you are staying home, but expect someone to use the entrance door later. Close all
protected perimeter windows and doors before arming. The green READY indicator on the keypad
should be lit if the system is ready to be armed.
To arm in STAY mode:
** See Quick Arming paragraph.
The keypad beeps three times and displays the armed STAY message. The red ARMED indicator lights
and the system announces "armed STAY–exit now."
When armed in STAY mode, the system will sound an alarm if a protected door or window is opened,
but you may otherwise move freely throughout the premises. Late arrivals can enter through the
entrance door without causing an alarm, but they must disarm the system within the entry delay
period or an alarm will occur.
Exit Time Restart-Exit Delay Restart/Reset
Ask your installer if this feature is active for your system. If active, you can restart the exit delay time
after arming in STAY mode by entering the user code and pressing the
STAY
key by itself. This avoids having the user disarm then re-arm the system after allowing
someone to enter or exit. This option also enables automatic exit delay reset, which resets exit delay if
the entry/exit door is re-opened and closed before exit delay time expires after arming. Automatic Exit
Delay Reset occurs only once during an armed period.
To restart exit delay while system is armed in STAY mode: Press
Arming In Away Mode
Use this mode when no one will be staying on the premises. Close all protected perimeter windows and
doors before arming. The green READY indicator on the keypad should be lit if the system is ready to
be armed.
To arm in AWAY mode:
** See Quick Arming paragraph.
The keypad beeps twice, or beeps continuously if exit warning has been programmed for your system,
and displays the armed AWAY message. The red ARMED indicator lights and the system announces
"armed AWAY–exit now."
When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened,
or if any movement is detected inside the premises. You may leave through the entrance door during
the exit delay period without causing an alarm. You may also re-enter through the entrance door, but
you must disarm the system within the entry delay period or an alarm will occur.
+ STAY or press and hold STAY **
Your User code**
+ AWAY or press and hold AWAY **
Your User code **
– 16 –
STAY
key, or by pressing the
STAY
key
Advertisement
Table of Contents
