Summary Of Changes; Overview Of Contents - Motorola MVME167P Installation And Use Manual

Summary of Changes

This is the second edition of MVME167P Single-Board Computer
Installation and Use. It supersedes the October 2000 edition and
incorporates the following updates.
Date
December 2001 Entries on the functionality of jumper header J9 were added in the
the Board
December 2001 A note on the functionality of jumper headers J2 and J7 was added to the
section
customer use.
December 2001 Errors in pin assignments were corrected in
December 2001 In
to read 0° C to 55° C in Table A-1.
December 2001 Some chapters and appendices were reorganized to reflect current MCG
practice in the structuring of documentation.

Overview of Contents

This manual is divided into the chapters and appendices listed below.
xvi
section in Chapter 1.
Switches and Jumpers on page
Appendix A, Specifications, the operating temperature range was corrected
Chapter 1, Hardware Preparation and
preparation and installation of the MVME167P single-board
computer
Chapter 2, Startup and
board; descriptions of the functionality of the switches, status
indicators, and I/O ports
Chapter 3, 167Bug
with a detailed description of the monitor (interactive command
portion of the firmware) as well as information on using the
debugger
Changes
1-6, explaining that these are not for
Table
Operation: Procedures for bringing up the
Firmware: An overview of the board firmware,
Preparing
6-3, VMEbus Connector P2.
Installation: Guidelines for