Motorola MVME167P Installation And Use Manual page 69

Table 4-1. MVME167P Configuration Settings (continued)
ENV Parameter and Options
Master Address Translation Select
#4
Master Control #4
Short I/O (VMEbus A16) Enable
[Y/N]
Short I/O (VMEbus A16) Control
F-Page (VMEbus A24) Enable
[Y/N]
F-Page (VMEbus A24) Control
ROM Speed Bank A Code
ROM Speed Bank B Code
Static RAM Speed Code
PCC2 Vector Base
VMEC2 Vector Base #1
VMEC2 Vector Base #2
VMEC2 GCSR Group Base
Address
http://www.motorola.com/computer/literature
Default Meaning of Default
0000 0000 This register defines which bits of the
address are significant. A logical "1"
indicates significant address bits, logical "0"
is non-significant. Default is 0.
00 Defines the access characteristics for the
address space defined with this master
address decoder. Default is $00.
Y Yes, Enable the Short I/O Address Decoder.
01 Defines the access characteristics for the
address space defined with the Short I/O
address decoder. Default is $01.
Y Yes, Enable the F-Page Address Decoder.
02 Defines the access characteristics for the
address space defined with the F-Page
address decoder. Default is $02.
04 Defines the ROM access time. The default is
$04, which sets an access time of five clock
04
cycles of the local bus.
02 Defines the SRAM access time. Default is
$02.
05 Base interrupt vector for the component
06 specified. Default: PCCchip2 = $05,
07 VMEchip2 Vector 1 = $06, VMEchip2
Vector 2 = $07.
D2 Specifies group address ($FFFFXX00) in
Short I/O for this board. Default = $D2.
ENV - Set Environment
4-11
4