Description - Siemens RUGGEDCOM RSG2100 Installation Manual

Chapter 1
Introduction
Universal Power Supply Options
• Fully integrated, dual-redundant (optional) power supplies
• Universal high-voltage range: 88-300 VDC or 85-264 VAC
• Screw or pluggable terminal blocks for reliable, maintenance-free connections
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)
Section 1.2

Description

The RUGGEDCOM RSG2100 features various ports, controls and indicator LEDs on the display panel for
connecting, configuring and troubleshooting the device. The display panel can be located on the rear, front or top
of the device, depending on the mounting configuration.
Figure 1: RUGGEDCOM RSG2100
1. Fiber or Copper Ethernet Ports 2. Port Status Indicator LEDs 3. Mode Button 4. RS-232 Serial Console Port (RJ45) 5. Display Mode
Indicator LEDs 6. Alarm Indicator LED 7. Power Module Indicator LEDs
Communication Ports
Port Status Indicator LEDs
2
1
Ports for communicating with other devices or accessing the RUGGEDCOM ROS operating
system are described in Chapter 3, Communication
Port status indicator LEDs indicate the operational status of each port, dependent on the
currently selected mode.
Mode
Status
Duplex
Speed
2 3
Ports.
Color/State
Green (Solid)
Green (Blinking)
Off
Green
Orange
Off
Green (Solid)
Green (Blinking)
Orange (Solid)
Off
RUGGEDCOM RSG2100
Installation Guide
5
6
7
4
Description
Link detected
Link activity
No link detected
Full duplex mode
Half duplex mode
No link detected
100 Mbps
1000 Mbps
10 Mbps
No link detected
Description