Technical Specifications; Power Supply Specifications - Siemens RUGGEDCOM RSG2100 Installation Manual

RUGGEDCOM RSG2100
Installation Guide

Technical Specifications

This section details the specifications and operating conditions of the device.
CONTENTS
• Section 4.1, "Power Supply Specifications"
• Section 4.2, "Failsafe Relay Specifications"
• Section 4.3, "Supported Networking Standards"
• Section 4.4, "Copper Ethernet Port Specifications"
• Section 4.5, "Fiber Optic Ethernet Port Specifications"
• Section 4.6, "Operating Environment"
• Section 4.7, "Mechanical Specifications"
Section 4.1

Power Supply Specifications

The RUGGEDCOM RSG2100 can be equipped with the following power supplies:
CAUTION!
Electrical hazard – risk of damage to the device. Disconnect the device from the power supply if power
input is above or below the specified input range.
Hazardous Environments
Power Supply Type
24 VDC
48 VDC
d
HI (125/250 VDC)
d
HI (100/240 VAC)
a
(F) denotes fast-acting fuse
b
(T) denotes time-delay fuse.
c
Power consumption varies based on configuration. 10/100Base-TX ports consume roughly 1 W less than fiber optic ports.
d
The HI power supply is the same power supply for both AC and DC.
Power Supply Specifications
Input Range
Minimum Maximum
24 VDC
48 VDC
125 VDC 250 VDC
100 VAC 240 VAC
Internal Fuse Rating
24 VDC 2.0 A(F)
48 VDC 1.0 A(T)
600 mA(T)
600 mA(T)
Chapter 4
Technical Specifications
Maximum Power
a b
c
Consumption
28 W
29