Table of Contents
Advertisement
Safety information
Safety information
Applications
conforming with
specifications
Documentation
Disposal
3
The interface modules are constructed and manufactured for:
• all VIPA System 300S components
• communication and process control
• general control and automation applications
• industrial applications
• operation within the environmental conditions specified in the technical
data
• installation into a cubicle
Danger!
This device is not certified for applications in
• in explosive environments (EX-zone)
The manual must be available to all personnel in the
• project design department
• installation department
• commissioning
• operation
The following conditions must be met before using or commissioning
the components described in this manual:
• Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
• Installation and hardware modifications only by properly trained
personnel.
• The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
Manual VIPA System 300S
HB140E - IM - RE_353-1DP01 - Rev. 14/47
Advertisement
Table of Contents
