4 Permanent settings in programming mode
Unit for amount of water
Restore factory settings
30
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the program item.
'Display'
T Turn the Rotary Switch to change the setting.
T Press the
'Save'
'Saved'
appears briefly on the display.
'Display'
T Press the P button to exit programming mode.
In the program item
unit used for the amount of water.
Example: Proceed as follows to change the unit for the amount of
water from
'oz'
to 'ml'.
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the program item.
'Units'
T Turn the Rotary Switch until
T Press the
'Save'
'Saved'
appears briefly on the display.
'Units'
T Press the P button to exit programming mode.
In the program item
machine can be reset to its factory setting: All user settings (apart
from the 'filter' and 'water hardness') are reset to factory settings.
Your J6 then switches off.
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
'Display'
button.
'Machine
settings' /
'Units'
'Machine settings'
'Units'
'ml'
is displayed.
button.
'Machine settings'
'Machine settings'
'Factory setting'
is displayed.
you can select the
is displayed.
is displayed.
/
'Factory setting'
the
is displayed.
is displayed.