Setting The Water Hardness; Display Settings - Jura J6 Instructions For Use Manual

Setting the water
hardness

Display settings

T Turn the Rotary Switch until
T Press the Rotary Switch to enter the program item.
'Save energy'
T Turn the Rotary Switch until
T Press the
'Save'
'Saved' appears briefly on the display.
'Save energy'
T Press the P button to exit programming mode.
The harder the water is, the more frequently the J6 needs to be
descaled. It is therefore important to set the water hardness
accurately.
The water hardness was set when the machine was first used. You
can change this setting at any time.
The water hardness can be adjusted on a continuous scale between
1 °dH and 30 °dH.
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the program item.
'Water hardness'
T Turn the Rotary Switch to change the setting.
T Press the 'Save'
'Saved' appears briefly on the display.
'Water hardness'
T Press the P button to exit programming mode.
In the program item
display brightness (as a percentage).
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
4 Permanent settings in programming mode
'Save energy'
'Inactive'
button.
'Machine settings'
'Water hardness'
button.
'Machine settings' / 'Display'
'Machine settings'
is displayed.
is displayed.
is displayed.
is displayed.
you can set the
is displayed.
29