Jura J6 Instructions For Use Manual page 35

E JURA milk system cleaner is available from specialized dealers.
E To clean the milk system, use the container supplied.
T Press the P button.
'Maintenance status'
T Press the Rotary Switch.
'Clean'
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch.
'Clean the milk system'
T Press the Rotary Switch again.
T Press the 'Start'
T Remove the milk pipe from the milk container or carton.
T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
position z.
T Connect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
T Press the 'Next' button.
'Milk system is being cleaned'
frother and the milk pipe are cleaned.
T During the first brief interruption, set the setting wheel of
the cappuccino frother to the Milk Foam position 5.
'Water for cleaning milk system'
T Rinse the container thoroughly and fill the front part with
fresh water up to the upper mark.
T Place this under the cappuccino frother and reconnect the
milk pipe to the container.
T Press the 'Next' button.
'Milk system is being cleaned'
frother and the milk pipe are rinsed with fresh water.
The start screen is displayed.
'Clean the milk system'
button.
appears and the cappuccino
appears and the cappuccino
5 Maintenance
is
35