Preparing And Using For The First Time; Jura On The Internet; Setting Up The Machine; Filling The Bean Container - Jura J6 Instructions For Use Manual

1 Preparing and using for the first time

1 Preparing and using for the first time

JURA on the Internet

Setting up the machine

Filling the bean container

Determining the water
hardness
10
Visit us on the Internet (www.jura.com). You will find interesting and
up-to-date information on your J6 and on every aspect of coffee.
When setting up your J6, please note the following:
U
Place the J6 on a horizontal surface that is not sensitive to
water.
U
Choose a spot for your J6 which protects the machine against
overheating. Ensure that the ventilation slots are not covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
NOTICE Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean
container.
T Open the bean container cover and remove the aroma
preservation cover.
T Remove any dirt or foreign objects from inside the bean
container.
T Fill the bean container with coffee beans, then close the
aroma preservation cover and the bean container cover.
When you use the machine for the first time, you must set the water
hardness. If you do not know the hardness of your water, you can
find this out first. Use the Aquadur® test strips supplied with the
machine.
T Hold the test strip briefly (for 1 second) under flowing water.
Shake off the water.
T Wait for about 1 minute.