Language; Querying Information - Jura J6 Instructions For Use Manual

Language

Querying information

T Press the Rotary Switch to enter the program item.
'Factory setting'
settings?'
T Press the 'Yes'
'Saved' appears briefly on the display.
Your J6 is switched off.
In this program item you can set the language used by your J6.
Example: Proceed as follows to change the language from
to 'Deutsch'.
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Choose language'
T Press the Rotary Switch to enter the program item.
'Choose language'
T Turn the Rotary Switch until
T Press the 'Save'
'Gespeichert'
'Sprachauswahl'
T Press the P button to exit programming mode.
'Bitte wählen'
In the program item
following information:
U
'Product counter': Number of prepared specialty coffees, milk
and hot water
U
'Maintenance counter': Number of maintenance programs
performed (cleaning, descaling etc.)
U
'Version': Software version
Example: Proceed as follows to view the number of specialty coffees
prepared.
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
4 Permanent settings in programming mode
/ 'Reset the machine to the factory
button.
'Machine settings'
'Deutsch'
button.
appears briefly on the display.
'Machine settings'
'Machine settings'
'English'
is displayed.
is displayed
you can view the
is displayed.
31