Setting The Water Hardness; Automatic Switch-Off; Unit For Amount Of Water - Jura A7 Instructions For Use Manual

4 Permanent settings in programming mode
T Press the Rotary Switch to exit the pro-
gramme item.
PRODUCT
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to exit programming
mode.
READY

Setting the water hardness

E If you are using the CLARIS Blue filter
cartridge and have activated it in program-
ming mode, you will not be able to adjust
the water hardness.
The harder the water is, the more frequently the
JURA needs to be descaled. It is therefore impor-
tant to set the water hardness accurately.
The water hardness can be adjusted on a continu-
ous scale between 1 °dH and 30 °dH.
READY
Precondition:
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
is displayed.
T Press the Rotary Switch to enter the
programme item.
16°dH
(Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK , the water hardness is now set.
HARDNESS
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to exit programming
mode.
READY
46
EXIT
is
is displayed.
HARDNESS
EXIT
is

Automatic switch-off

By instructing your JURA to automatically switch
itself off, you can cut down your energy consump-
tion. If this function is activated, your JURA
switches off automatically after the preset time
following the last action on the machine.
The automatic switch-off can be set to between
15 minutes and 9 hours.
READY
Precondition:
T Press and hold the Rotary Switch until
RINSE appears.
T Turn the Rotary Switch until
is displayed.
T Press the Rotary Switch to enter the
programme item.
2 HRS (Example)
T Turn the Rotary Switch to change the
setting.
T Press the Rotary Switch to confirm the
setting.
OK , the switch-off time is now set.
OFF AFTER
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to exit programming
mode.
READY

Unit for amount of water

You can change the unit for the amount of water
from 'ml' to 'oz'.
READY
Precondition:
T Press and hold the Rotary Switch until
RINSE
appears.
T Turn the Rotary Switch until
displayed.
T Press the Rotary Switch to enter the
programme item.
ML (Example)
T Turn the Rotary Switch to change the
setting.
is displayed.
OFF AFTER
EXIT is
is displayed.
DISPLAY
is