Connecting Milk - Jura J6 Instructions For Use Manual

1 Preparing and using for the first time

Connecting milk

14
T Place a receptacle under the cappuccino frother, the coffee
spout and the hot-water spout.
T Remove the water tank and rinse it with cold water.
T Fill the water tank with fresh, cold water and reinsert the
tank.
'System is filling', the system fills up with water.
'Machine is heating'
'Machine is rinsing', water flows out of the coffee spout. The
rinse stops automatically. Your J6 is ready for use.
E The display shows the products you can prepare.
Your J6 creates fine, creamy, feather-light milk foam with a perfect
consistency. The most important requirement for frothing milk is
a milk temperature of 39–46 °F (4–8 °C). We would therefore
recommend using a milk cooler or a milk container.
E Suitable milk containers from JURA are available from
specialized dealers.
T Remove the protective cover from the cappuccino frother.
T Attach the milk pipe to the cappuccino frother.
T Connect the other end of the milk pipe to a milk container
or a milk cooler.