Changing The Filter - Jura J6 Instructions For Use Manual

Changing the filter

Rinsing of the filter stops automatically after approximately
10 oz (300 ml).
'Empty drip tray'
T Empty the drip tray and put it back into the machine.
'Filter operation',
'Please select product'
more ready for use.
E Once the filter cartridge stops working (depending on the
water hardness setting), the J6 will prompt you to change the
filter.
E CLEARYL Smart filter cartridges are available from specialized
dealers.
Precondition: 'Change filter'
T Place a receptacle under the hot-water spout.
T Remove and empty the water tank.
T Open the filter holder and remove the old CLEARYL Smart
filter cartridge and filter extension.
T Fit the filter cartridge extension on top of a new CLEARYL
filter cartridge Smart.
T Insert the filter cartridge with its extension into the water
tank.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just changed
the filter cartridge.
'Change the filter'
'Filter is being
spout.
'Empty drip tray'
T Empty the drip tray and put it back into the machine.
'Change the filter',
'Please select product'
more ready for use.
'Filter rinsing complete'
appears on the display. Your J6 is once
is displayed.
/ 'Saved'
rinsed', water flows out of the hot-water
'Filter rinsing complete'
appears on the display. Your J6 is once
5 Maintenance
37