1 Preparing and using for the first time
First-time use with filter
cartridge activation
12
T Press the
'Saved'
'Water hardness'
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 'Preparing and using for the first
time – Determining the water hardness').
T Turn the Rotary Switch to change the water hardness
setting, e.g. to '25 °dH'.
T Press the
'Saved'
'Insert filter'
E Now decide whether you want to operate your J6 with or
without a CLEARYL Smart filter cartridge.
Operation with filter cartridge: go straight to the next section.
Operation without filter cartridge: see Chapter 1 'Preparing and
using for the first time – First-time use without filter cartridge
activation'.
NOTICE
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Place one receptacle under the hot-water spout and another
under the cappuccino frother.
T Remove the water tank and rinse it with cold water.
T Open the filter holder.
T Fit the filter cartridge extension supplied on top of a CLEARYL
Smart filter cartridge .
'Save'
button.
appears briefly on the display to confirm the setting.
'Save'
button.
appears briefly on the display.