Rotary Pushbutton; Keys On Version With Three-Key Operation - Samson 3374 Series Mounting And Operating Instructions

Operating controls
6.1.2

Rotary pushbutton

The operating controls are located underneath the housing cover (see Fig. 6-1).
The settings are changed using the rotary pushbutton.
Turn : select/change codes and values
Press : confirm setting/change
NOTICE
!
Changed parameters are immediately effective!
The process is directly affected by these changes.
Î First check any changes made to parameters before confirming them by pressing the ro-
tary pushbutton.
6.1.3

Keys on version with three-key operation

In the special version with three-key operation, the actuator is operated using three keys on
the cover:
Select/change codes and values (increase value)
Confirm setting/change
Select/change codes and values (reduce value)
Note
The operation and setting of the Type 3375 Actuator is described in these Mounting and Op-
erating Instructions based on the version with rotary pushbutton.
Pressing keys and
sponds to pressing the rotary pushbutton of the standard actuator version.
6-4
corresponds to turning the rotary pushbutton and the key corre-
EB 8331-4 EN