Rotary Pushbutton; Menu Control - Samson 3374-10 Mounting And Operating Instructions

Operation
7.2

Rotary pushbutton

The rotary pushbutton is used for on-site operation of the actuator.
Turn : select/change codes and values
Press : confirm setting/change
NOTICE
!
Changed parameters are immediately effective!
The process is directly affected by these changes.
First check any changes made to parameters before confirming them by pressing the rotary
pushbutton.
7.2.1

Menu control

Activating the level/parameters
icon indicates a jump to another level with further options.
Î
1. Turn to select the required code.
2. Press to confirm. The code is selected.
Example shown: Configuration level Code 10 selected
Setting parameters
1. Press . The reading blinks on the display.
2. Turn until the required setting is reached.
3. Press to confirm the setting.
Example shown: source Code c01 set to mA.
Exit level
Î Press to exit the level.
Example shown: Information level exited.
38 EB 8331-4 EN