Mounting of device
6.3
Removing device from Top Hat Rail
netTAP NT 151RERE | RealTime Ethernet gateway
DOC150802UM01EN | Revision 1 | English | 201607 | Released | Public
Ø Before dismounting the netTAP from the top hat rail, first remove the
power supply cable and all data cables from the device.
Figure 7: Removing the netTAP device from Top Hat Rail
Ø Put a screw driver into the slot of the latch at the bottom of the device.
Ø To disengage the lock of the hook, pull down the latch with the screw
driver.
Ø Take the device off the top hat rail.
33/81
© Hilscher 2016