Decommissioning, Dismounting And Disposal; Putting The Device Out Of Operation; Removing Device From Top Hat Rail; Disposal Of Waste Electronic Equipment - hilscher NIOT-E-TPI51-EN-RE User Manual

Decommissioning, dismounting and disposal

19 Decommissioning, dismounting and disposal

19.1 Putting the device out of operation

19.2 Removing device from top hat rail

19.3 Disposal of waste electronic equipment

Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM04EN | Revision 4 | English | 2018-08 | Released | Public
Danger of Unsafe System Operation!
To prevent personal injury or property damage, make sure that the removal
of the device from your plant during operation will not affect the safe
operation of the plant.
Ø Disconnect all communication cables from the device.
Ø Disconnect the power supply plug.
Ø Remove the device from the DIN top hat rail. .
Ø Before dismounting the Edge Gateway from the top hat rail, first remove
the power supply cable and all data cables from the device.
Ø Put a screw driver into the slot of the latch at the bottom of the device.
Ø To disengage the lock of the hook, pull down the latch with the screw
driver.
Ø Take the device off the top hat rail.
Important notes from the European Directive 2012/16/EU "Waste Electrical
and Electronic Equipment (WEEE)"
Waste electronic equipment
Art und Quelle der Gefahr
This product must not be treated as household waste.
This product must be disposed of at a designated waste electronic
equipment collecting point.
Waste electronic equipment may not be disposed of as household waste.
As a consumer, you are legally obliged to dispose of all waste electronic
equipment according to national and local regulations.
247/258
© Hilscher 2017 – 2018