Usb Setup - Intec CP2020 Configuration Manual

USB S
ETUP
ITEM
USB
Speed
Soft Reset
Offline Receive
Serial Number
VALUE
Enable
Disable
480Mbps
12Mbps
Enable
Disable
Enable
Disable
Enable
Disable
Appendix: the printer menu > 78
DESCRIPTION
Enables/Disables the USB interface.
Sets the maximum USB interface transfer
speed.
Enables/Disables the Soft Reset
command.
Enables/disables a function that maintains
the receive-possible state without
changing an interface signal even though
an alarm occurs. When this is set to
Enable, the interface keeps the receive-
possible state even when you press the
Off-line operating panel switch. The
interface sends the BUSY signal only when
the reception buffer is full or a service call
occurs.
This menu is not displayed on a Non-PS
machine.
Enables/Disables the USB serial number,
used to identify a USB device to which a
PC is connected.