Intec CP2020 Configuration Manual page 38

2. Enter the current value, then enter the new value and re-
enter it under Confirm ....
NOTE
The default admin password is the last six digits of the MAC
Address, minus any punctuation marks. e.g., for a MAC
(Ethernet) Address of 00:80:87:A4:55:79, the password
would be A45579.
3. Click OK.
4. Click Apply.
TCP/IP Tab
ITEM
Use TCP/IP Protocol
Use DHCP/BOOTP
IP Address
Subnet Mask
Default Gateway
Use IPv6 Function
COMMENTS
Enable/disable TCP/IP protocol.
Click to select this item if the IP address, subnet
mask, default gateway and IP addresses for DNS
primary server and secondary servers are
retrieved from the DHCP or BOOTP server.
Set the IP address of the selected network
interface card.
Set the subnet mask of the selected network
interface card.
Set the default gateway of the selected network
interface card.
Use to enable/disable IPv6.
MacOS printer setup utility > 38