Connecting To Your Printer; Snow Leopard (10.6) And Leopard (10.5); Usb - Intec CP2020 Configuration Manual

C
ONNECTING TO YOUR PRINTER
NOTE
The steps below are for Snow Leopard (10.6) and Leopard
(10.5) Operating Systems. The principle of connecting to your
printer is the same, though the steps may vary for different
Operating Systems. Please refer to the ReadMe file on the
driver DVD.
S L
NOW EOPARD

USB

1. Choose Apple Menu > System Preferences > Print &
Fax.
2. If the printer is already in the list of printers, click "-" to
remove it.
NOTE
This is necessary as Leopard may not be using the correct
printer driver files.
3. Click "+" to add a new printer.
4. Ensure the Default tab is selected and select your printer
from the list.
> Your printer is displayed as type USB in the list of
available printers.
> Ensure that the Print Using: selection matches your
printer. If Generic PostScript Printer is displayed,
select a driver that matches.
5. Click Add.
6. Click Configure... and ensure the hardware options
displayed match your printer.
NOTE
Hardware options are not configured automatically.
7. Restart your computer.
(10.6) L
AND EOPARD
Connecting to your printer > 45
(10.5)