Making Changes In The Boot Menu - Intec CP2020 Configuration Manual

10. Press the Up-arrow or Down-arrow buttons repeatedly
until FTP is highlighted.
11. Use the Up-arrow or Down-arrow buttons to highlight
Enable.
12. Press the Enter button to engage the setting.
An asterisk (*) appears next to the new setting.
13. Press the Online button to exit menu mode and return to
the Ready to print status.
M C
AKING HANGES IN THE
1. Turn the printer OFF.
2. Press and hold the Enter button while turning the printer
back on.
NOTE
Keep pressing the Enter button until
appears on the display.
3. Use the Up-arrow or Down-arrow buttons to scroll to
an entry and the Enter button to select the entry, until
you reach the item you wish to change.
4. Use the Up-arrow or Down-arrow buttons to scroll
down to the setting you wish to engage, then press the
Enter button.
An asterisk (*) appears next to the new setting.
5. Press the Online button to exit menu mode and return to
the Ready to print status.
B M
OOT ENU
Appendix: the printer menu > 61
INITIALISING