Overview; Setting Up A Network Printer - Intec CP2020 Configuration Manual

O
VERVIEW
This section is for administrators and it should be read in
conjunction with the relevant Mac OS X manual. Please ensure
your Mac has the latest Mac OS X updates installed.
To get the best results from your printer, install the Postscript
Printer Description (PPD) file supplied with your printer and use
this to customise the Apple PostScript driver that is built-in to the
OS X. Features provided by the PPD file includes:
> Supported paper types
> Paper trays
> Printer resolution
> Printer colour matching
NOTE
The PPD file must be installed using the Intec Driver Installer
to ensure that all essential files are copied.
S
ETTING UP A NETWORK PRINTER
1. If the printer does not already have an IP address, use the
Printer Setup Utility to assign an IP address.
printer setup utility interface" on page 34.
To do this, you will need to know the printer's MAC
address. This can be found on the print server's network
summary printout.
page 32.
2. Install the printer driver software. This copies the printer
driver files to the correct location on your Mac OS X
system.
3. Make a connection to the printer by USB, TCP/IP,
Rendezvous or AppleTalk.
printer" on page 45.
4. If required, enable hardware device such as duplex unit or
printer hard disk.
options" on page 48.
See "Network summary printout" on
See "Connecting to your
See "Configuring printer hardware
Overview > 31
See "The