Configuration Methods - Intec CP2020 Configuration Manual

C
ONFIGURATION METHODS
You can configure the print server by using one of the following
methods:
UTILITY
Quick Setup
FEATURES
Configure the print server
easily and simply without
installing any software
packages into your
system.
You can set the following:
• Enable/disable TCP/IP,
EtherTalk, NetBEUI
protocols.
• Set IP address, Subnet
Mask and Gateway for
TCP/IP manually or by
using DHCP.
• Zone name and Port
name for EtherTalk.
Introduction > 12
SYSTEM
REQUIREMENTS
Windows*
• Windows 2000 Server/
Professional
• Windows XP Home/
Professional
• Windows XP
Professional x 64
Edition
• Windows Server 2003
• Windows Server 2003 x
64 Edition
• Windows Server 2008
• Windows Server 2008 x
64 Edition
• Windows Vista 32-bit
• Windows Vista 64-bit
• Windows 7
• Windows 7 x 64 Edition
• Windows Server 2008
R2
* with TCP/IP protocol or
IPX/SPX protocol
installed.
Mac:
Mac OS X 10.4 or
greater
You need to install
Rosetta if using MAC OS
X 10.6