Intec CP2020 Configuration Manual page 63

ITEM VALUE
Web Enable
Disable
Telnet Enable
Disable
FTP Enable
Disable
SNMP Enable
Disable
Network Scale Normal
Small
Hub Link Auto
Setting Negotiate
1000Base-T
Full
100Base-TX
Full
100Base-TX
Half
10Base-T Full
10Base-T Half
Factory Execute
Defaults?
Print Setup
ITEM VALUE
Personality Auto
PostScript
PCL
IBM PPR
EPSON FX
Copies 1 ~ 999
Duplex ON
OFF
DESCRIPTION
Enables/Disables the Web/IPP (TCP/IP).
Enables/Disables Telnet (TCP/IP).
Enables/Disables FTP (TCP/IP).
Enables/Disables SNMP of FTP (TCP/IP or
NetWare).
Normal: Can work effectively even when
connected to a HUB that has a spanning tree
feature. However, printer start up time gets
longer when computers are connected to two
or three small LANs.
Small: Computers can cover from two or three
small LANs to a large LAN, but it may not work
effectively when it is connected to a HUB with a
spanning tree feature.
Sets the hub linking method.
Specifies whether to initialise the network
menu.
Appendix: the printer menu > 63
DESCRIPTION
Selects a printer language.
Sets number of copies. Disabled for
local print, except for demo data.
Specifies duplex printing.