I
NSTALLING A NETWORK PRINTER
There are two ways to set up a network printer:
1.
Install automatically, using the Intec Driver Installer
2.
Install it yourself using Add Printer Wizard
U
I
SING THE
NTEC DRIVER INSTALLER
The Intec driver installer program searches for compatible
printers on the Network and installs and configures the printer
drivers with the correct port settings automatically.
Using the Intec driver installer program, you can install to the
following connected printer types:
1.
Locally connected printers
>
USB port
>
Parallel port
2.
Networked printers
>
Directly connected (i.e. Peer-to-peer) printers via TCP/
IP. The Microsoft Standard TCP/IP is installed and
configured to use Port 9100 with the printer's IP
address.
>
Printers not directly connected, but shared via a PC
(i.e. Client-Server)
W
HY USE THE
>
Automatically discovers printers on the Network (TCP/IP)
>
Installs driver and correctly assigns appropriate port and
IP address
>
Allows easy configuration and sharing of the printer with
other Network users
>
Automatically configures the printer drivers with the
appropriate hardware device options such as hard disk
drive, duplex unit (via Network Extension software)
I
NTEC DRIVER INSTALLER
Installing a network printer > 27
?