Intec CP2020 Configuration Manual page 69

ITEM
Zero character
Line pitch
White page skip
CR function
LF function
Line length
Form length
TOF position
Left margin
Fit to letter
Text height
Cont paper mode
VALUE
Normal
Slashed
6LPI
8LPI
OFF
ON
CR
CR+LF
LF
LF+CR
80 column
136 column
11 inch
11.7 inch
12 inch
0.0 inch
0.1 ~ 1.0 inch
0.0 inch
0.1 ~ 1.0 inch
Enable
Disable
Same
Diff
ON
OFF
Appendix: the printer menu > 69
DESCRIPTION
Sets the 0 style.
Sets the line pitch.
Sets whether a blank sheet is
ejected.
Sets the action when the CR
code is received.
Sets the action when the LF
code is received.
Sets the number of
characters per line.
Sets the paper length.
Sets the print position from
the top edge of the paper.
Sets the print position from
the left edge of the paper.
Sets the print mode that fits
print data equivalent to 11
inch (66 lines) into Letter size
printable area.
Sets character height.
Same: same height,
regardless of CPI.
Diff: character heights vary
according to CPI.
Sets the edit direction of
paper supported by A3 printer
to landscape.